annotate make/windows/create.bat @ 3510:dd467a878e9e

7197100: new hotspot build - hs23.6-b03 Reviewed-by: johnc
author jcoomes
date Sat, 08 Sep 2012 08:30:24 -0700
parents 15d6977f04b0
children
rev   line source
duke@0 1 @echo off
duke@0 2 REM
sla@2121 3 REM Copyright (c) 1999, 2011, Oracle and/or its affiliates. All rights reserved.
duke@0 4 REM DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
duke@0 5 REM
duke@0 6 REM This code is free software; you can redistribute it and/or modify it
duke@0 7 REM under the terms of the GNU General Public License version 2 only, as
duke@0 8 REM published by the Free Software Foundation.
duke@0 9 REM
duke@0 10 REM This code is distributed in the hope that it will be useful, but WITHOUT
duke@0 11 REM ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
duke@0 12 REM FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
duke@0 13 REM version 2 for more details (a copy is included in the LICENSE file that
duke@0 14 REM accompanied this code).
duke@0 15 REM
duke@0 16 REM You should have received a copy of the GNU General Public License version
duke@0 17 REM 2 along with this work; if not, write to the Free Software Foundation,
duke@0 18 REM Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
duke@0 19 REM
trims@1489 20 REM Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
trims@1489 21 REM or visit www.oracle.com if you need additional information or have any
trims@1489 22 REM questions.
duke@0 23 REM
duke@0 24 REM
duke@0 25
duke@0 26 REM This is the interactive build setup script (as opposed to the batch
duke@0 27 REM build execution script). It creates $HotSpotBuildSpace if necessary,
duke@0 28 REM copies the appropriate files out of $HotSpotWorkSpace into it, and
stefank@1869 29 REM builds and runs ProjectCreator in it. This has the side-effect of creating
duke@0 30 REM the vm.vcproj file in the buildspace, which is then used in Visual C++.
duke@0 31
duke@0 32 REM
duke@0 33 REM Since we don't have uname and we could be cross-compiling,
duke@0 34 REM Use the compiler to determine which ARCH we are building
duke@0 35 REM
dcubed@1335 36 REM Note: Running this batch file from the Windows command shell requires
dcubed@1335 37 REM that "grep" be accessible on the PATH. An MKS install does this.
dcubed@1335 38 REM
sla@1950 39
sla@1950 40 cl 2>NUL >NUL
sla@1950 41 if %errorlevel% == 0 goto nexttest
sla@1950 42 echo Make sure cl.exe is in your PATH before running this script.
sla@1950 43 goto end
sla@1950 44
sla@1950 45 :nexttest
sla@1950 46 grep -V 2>NUL >NUL
sla@1950 47 if %errorlevel% == 0 goto testit
sla@1950 48 echo Make sure grep.exe is in your PATH before running this script. Either cygwin or MKS should work.
sla@1950 49 goto end
sla@1950 50
sla@1950 51
sla@1950 52 :testit
sla@2121 53 cl 2>&1 | grep "x64" >NUL
duke@0 54 if %errorlevel% == 0 goto amd64
duke@0 55 set ARCH=x86
duke@0 56 set BUILDARCH=i486
duke@0 57 set Platform_arch=x86
duke@0 58 set Platform_arch_model=x86_32
sla@1950 59 goto done
duke@0 60 :amd64
duke@0 61 set ARCH=x86
duke@0 62 set BUILDARCH=amd64
duke@0 63 set Platform_arch=x86
duke@0 64 set Platform_arch_model=x86_64
sla@1950 65 :done
duke@0 66
duke@0 67 setlocal
duke@0 68
duke@0 69 if "%1" == "" goto usage
duke@0 70
sla@1950 71 if not "%2" == "" goto usage
duke@0 72
sla@1950 73 REM Set HotSpotWorkSpace to the directy two steps above this script
sla@1950 74 for %%i in ("%~dp0..") do ( set HotSpotWorkSpace=%%~dpi)
sla@1950 75 set HotSpotBuildRoot=%HotSpotWorkSpace%build
sla@2121 76 set HotSpotBuildSpace=%HotSpotBuildRoot%\vs-%BUILDARCH%
sla@1950 77 set HotSpotJDKDist=%1
sla@1950 78
duke@0 79
duke@0 80 REM figure out MSC version
kamg@104 81 for /F %%i in ('sh %HotSpotWorkSpace%/make/windows/get_msc_ver.sh') do set %%i
duke@0 82
duke@0 83 echo **************************************************************
sla@2121 84 set ProjectFile=%HotSpotBuildSpace%\jvm.vcproj
duke@0 85 if "%MSC_VER%" == "1200" (
sla@2121 86 set ProjectFile=%HotSpotBuildSpace%\jvm.dsp
duke@0 87 echo Will generate VC6 project {unsupported}
duke@0 88 ) else (
ikrylov@668 89 if "%MSC_VER%" == "1400" (
ikrylov@668 90 echo Will generate VC8 {Visual Studio 2005}
ikrylov@668 91 ) else (
ikrylov@668 92 if "%MSC_VER%" == "1500" (
ikrylov@668 93 echo Will generate VC9 {Visual Studio 2008}
ikrylov@668 94 ) else (
sla@1950 95 if "%MSC_VER%" == "1600" (
sla@2290 96 echo Will generate VC10 {Visual Studio 2010}
sla@2290 97 set ProjectFile=%HotSpotBuildSpace%\jvm.vcxproj
sla@1950 98 ) else (
ikrylov@668 99 echo Will generate VC7 project {Visual Studio 2003 .NET}
ikrylov@668 100 )
ikrylov@668 101 )
duke@0 102 )
sla@1950 103 )
sla@2290 104 echo %ProjectFile%
duke@0 105 echo **************************************************************
duke@0 106
duke@0 107 REM Test all variables to see whether the directories they
duke@0 108 REM reference exist
duke@0 109
duke@0 110 if exist %HotSpotWorkSpace% goto test1
duke@0 111
duke@0 112 echo Error: directory pointed to by HotSpotWorkSpace
duke@0 113 echo does not exist, or the variable is not set.
duke@0 114 echo.
duke@0 115 goto usage
duke@0 116
duke@0 117 :test1
duke@0 118 if exist %HotSpotBuildSpace% goto test2
duke@0 119 if not "%HotSpotBuildSpace%" == "" mkdir %HotSpotBuildSpace%
duke@0 120 if exist %HotSpotBuildSpace% goto test2
duke@0 121 echo Error: directory pointed to by HotSpotBuildSpace
duke@0 122 echo does not exist, or the variable is not set.
duke@0 123 echo.
duke@0 124 goto usage
duke@0 125
duke@0 126 :test2
duke@0 127 if exist %HotSpotJDKDist% goto test3
duke@0 128 echo Error: directory pointed to by %HotSpotJDKDist%
duke@0 129 echo does not exist, or the variable is not set.
duke@0 130 echo.
duke@0 131 goto usage
duke@0 132
duke@0 133 :test3
duke@0 134 if not "%HOTSPOTMKSHOME%" == "" goto makedir
sla@1950 135 if exist c:\cygwin\bin set HOTSPOTMKSHOME=c:\cygwin\bin
sla@1950 136 if not "%HOTSPOTMKSHOME%" == "" goto makedir
duke@0 137 echo Warning: please set variable HOTSPOTMKSHOME to place where
duke@0 138 echo your MKS/Cygwin installation is
duke@0 139 echo.
duke@0 140 goto usage
duke@0 141
duke@0 142 :makedir
duke@0 143 echo NOTE: Using the following settings:
duke@0 144 echo HotSpotWorkSpace=%HotSpotWorkSpace%
duke@0 145 echo HotSpotBuildSpace=%HotSpotBuildSpace%
duke@0 146 echo HotSpotJDKDist=%HotSpotJDKDist%
duke@0 147
duke@0 148
duke@0 149 REM This is now safe to do.
duke@0 150 :copyfiles
duke@0 151 for /D %%i in (compiler1, compiler2, tiered, core, kernel) do (
sla@1950 152 if NOT EXIST %HotSpotBuildSpace%\%%i\generated mkdir %HotSpotBuildSpace%\%%i\generated
sla@1950 153 copy %HotSpotWorkSpace%\make\windows\projectfiles\%%i\* %HotSpotBuildSpace%\%%i\generated > NUL
duke@0 154 )
duke@0 155
duke@0 156 REM force regneration of ProjectFile
sla@2121 157 if exist %ProjectFile% del %ProjectFile%
duke@0 158
duke@0 159 for /D %%i in (compiler1, compiler2, tiered, core, kernel) do (
sla@1950 160 echo -- %%i --
sla@1950 161 echo # Generated file! > %HotSpotBuildSpace%\%%i\local.make
duke@0 162 echo # Changing a variable below and then deleting %ProjectFile% will cause >> %HotSpotBuildSpace%\%%i\local.make
duke@0 163 echo # %ProjectFile% to be regenerated with the new values. Changing the >> %HotSpotBuildSpace%\%%i\local.make
sla@1950 164 echo # version requires rerunning create.bat. >> %HotSpotBuildSpace%\%%i\local.make
duke@0 165 echo. >> %HotSpotBuildSpace%\%%i\local.make
sla@1950 166 echo Variant=%%i >> %HotSpotBuildSpace%\%%i\local.make
sla@1950 167 echo WorkSpace=%HotSpotWorkSpace% >> %HotSpotBuildSpace%\%%i\local.make
duke@0 168 echo HOTSPOTWORKSPACE=%HotSpotWorkSpace% >> %HotSpotBuildSpace%\%%i\local.make
sla@1950 169 echo HOTSPOTBUILDROOT=%HotSpotBuildRoot% >> %HotSpotBuildSpace%\%%i\local.make
duke@0 170 echo HOTSPOTBUILDSPACE=%HotSpotBuildSpace% >> %HotSpotBuildSpace%\%%i\local.make
duke@0 171 echo HOTSPOTJDKDIST=%HotSpotJDKDist% >> %HotSpotBuildSpace%\%%i\local.make
duke@0 172 echo ARCH=%ARCH% >> %HotSpotBuildSpace%\%%i\local.make
duke@0 173 echo BUILDARCH=%BUILDARCH% >> %HotSpotBuildSpace%\%%i\local.make
duke@0 174 echo Platform_arch=%Platform_arch% >> %HotSpotBuildSpace%\%%i\local.make
duke@0 175 echo Platform_arch_model=%Platform_arch_model% >> %HotSpotBuildSpace%\%%i\local.make
sla@2121 176 echo MSC_VER=%MSC_VER% >> %HotSpotBuildSpace%\%%i\local.make
duke@0 177
sla@1950 178 for /D %%j in (debug, fastdebug, product) do (
sla@1950 179 if NOT EXIST %HotSpotBuildSpace%\%%i\%%j mkdir %HotSpotBuildSpace%\%%i\%%j
sla@1950 180 )
sla@1950 181
sla@1950 182 pushd %HotSpotBuildSpace%\%%i\generated
duke@0 183 nmake /nologo
duke@0 184 popd
stefank@1869 185
duke@0 186 )
duke@0 187
sla@1950 188 pushd %HotSpotBuildRoot%
stefank@1869 189
sla@1950 190 REM It doesn't matter which variant we use here, "compiler1" is as good as any of the others - we need the common variables
sla@2121 191 nmake /nologo /F %HotSpotWorkSpace%/make/windows/projectfiles/common/Makefile LOCAL_MAKE=%HotSpotBuildSpace%\compiler1\local.make %ProjectFile%
stefank@1869 192
stefank@1869 193 popd
stefank@1869 194
duke@0 195 goto end
duke@0 196
duke@0 197 :usage
sla@1950 198 echo Usage: create HotSpotJDKDist
duke@0 199 echo.
sla@1950 200 echo This is the VS build setup script (as opposed to the batch
sla@1950 201 echo build execution script). It creates a build directory if necessary,
sla@1950 202 echo copies the appropriate files out of the workspace into it, and
stefank@1869 203 echo builds and runs ProjectCreator in it. This has the side-effect of creating
duke@0 204 echo the %ProjectFile% file in the build space, which is then used in Visual C++.
sla@1950 205 echo.
sla@1950 206 echo The HotSpotJDKDist defines the JDK that should be used when running the JVM.
duke@0 207 echo Environment variable FORCE_MSC_VER allows to override MSVC version autodetection.
duke@0 208 echo.
duke@0 209 echo NOTE that it is now NOT safe to modify any of the files in the build
duke@0 210 echo space, since they may be overwritten whenever this script is run or
duke@0 211 echo nmake is run in that directory.
duke@0 212
duke@0 213 :end
duke@0 214
duke@0 215 endlocal