changeset 1326:ecba02d2d87d

8062223: Upgrading to ccache 1.3.10 disables the use of ccache Reviewed-by: ihse
author erikj
date Tue, 10 Feb 2015 12:25:44 +0100
parents de6bd77b936e
children 507654772146
files README-builds.html common/autoconf/build-performance.m4 common/autoconf/generated-configure.sh common/autoconf/hotspot-spec.gmk.in common/autoconf/spec.gmk.in make/common/NativeCompilation.gmk
diffstat 6 files changed, 83 insertions(+), 76 deletions(-) [+]
line wrap: on
line diff
--- a/README-builds.html	Fri Feb 06 12:46:59 2015 +0100
+++ b/README-builds.html	Tue Feb 10 12:25:44 2015 +0100
@@ -1463,14 +1463,13 @@
 
                 <h4>Building with ccache</h4>
 
-                <p>A simple way to radically speed up compilation of native code
-                    (typically hotspot and native libraries in JDK) is to install
-                    ccache. This will cache and reuse prior compilation results, if the
-                    source code is unchanged. However, ccache versions prior to 3.1.4
-                    does not work correctly with the precompiled headers used in
-                    OpenJDK. So if your platform supports ccache at 3.1.4 or later, we
-                    highly recommend installing it. This is currently only supported on
-                    linux.</p> 
+                <p>The OpenJDK build supports building with ccache 
+                    when using gcc or clang. Using ccache can
+                    radically speed up compilation of native code if
+                    you often rebuild the same sources. Your milage
+                    may vary however so we recommend evaluating it for
+                    yourself. To enable it, make sure it's on the path
+                    and configure with <code>--enable-ccache</code>.</p> 
 
                 <h4>Building on local disk</h4>
 
--- a/common/autoconf/build-performance.m4	Fri Feb 06 12:46:59 2015 +0100
+++ b/common/autoconf/build-performance.m4	Tue Feb 10 12:25:44 2015 +0100
@@ -164,19 +164,26 @@
       [enable using ccache to speed up recompilations @<:@disabled@:>@])])
 
   CCACHE=
+  CCACHE_STATUS=
   AC_MSG_CHECKING([is ccache enabled])
-  ENABLE_CCACHE=$enable_ccache
   if test "x$enable_ccache" = xyes; then
-    AC_MSG_RESULT([yes])
-    OLD_PATH="$PATH"
-    if test "x$TOOLCHAIN_PATH" != x; then
-      PATH=$TOOLCHAIN_PATH:$PATH
+    if test "x$TOOLCHAIN_TYPE" = "xgcc" -o "x$TOOLCHAIN_TYPE" = "xclang"; then
+      AC_MSG_RESULT([yes])
+      OLD_PATH="$PATH"
+      if test "x$TOOLCHAIN_PATH" != x; then
+        PATH=$TOOLCHAIN_PATH:$PATH
+      fi
+      BASIC_REQUIRE_PROGS(CCACHE, ccache)
+      PATH="$OLD_PATH"
+      CCACHE_VERSION=[`$CCACHE --version | head -n1 | $SED 's/[A-Za-z ]*//'`]
+      CCACHE_STATUS="Active ($CCACHE_VERSION)"
+    else
+      AC_MSG_RESULT([no])
+      AC_MSG_WARN([ccache is not supported with toolchain type $TOOLCHAIN_TYPE])
     fi
-    BASIC_REQUIRE_PROGS(CCACHE, ccache)
-    CCACHE_STATUS="enabled"
-    PATH="$OLD_PATH"
   elif test "x$enable_ccache" = xno; then
     AC_MSG_RESULT([no, explicitly disabled])
+    CCACHE_STATUS="Disabled"
   elif test "x$enable_ccache" = x; then
     AC_MSG_RESULT([no])
   else
@@ -206,35 +213,31 @@
 AC_DEFUN([BPERF_SETUP_CCACHE_USAGE],
 [
   if test "x$CCACHE" != x; then
-    # Only use ccache if it is 3.1.4 or later, which supports
-    # precompiled headers.
-    AC_MSG_CHECKING([if ccache supports precompiled headers])
-    HAS_GOOD_CCACHE=`($CCACHE --version | head -n 1 | grep -E 3.1.@<:@456789@:>@) 2> /dev/null`
-    if test "x$HAS_GOOD_CCACHE" = x; then
-      AC_MSG_RESULT([no, disabling ccache])
-      CCACHE=
-      CCACHE_STATUS="disabled"
-    else
-      AC_MSG_RESULT([yes])
+    if test "x$USE_PRECOMPILED_HEADER" = "x1"; then
+      HAS_BAD_CCACHE=[`$ECHO $CCACHE_VERSION | \
+          $GREP -e '^1.*' -e '^2.*' -e '^3\.0.*' -e '^3\.1\.[0123]'`]
+      if test "x$HAS_BAD_CCACHE" != "x"; then
+        AC_MSG_ERROR([Precompiled headers requires ccache 3.1.4 or later, found $CCACHE_VERSION])
+      fi
       AC_MSG_CHECKING([if C-compiler supports ccache precompiled headers])
+      CCACHE_PRECOMP_FLAG="-fpch-preprocess"
       PUSHED_FLAGS="$CXXFLAGS"
-      CXXFLAGS="-fpch-preprocess $CXXFLAGS"
+      CXXFLAGS="$CCACHE_PRECOMP_FLAG $CXXFLAGS"
       AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [])], [CC_KNOWS_CCACHE_TRICK=yes], [CC_KNOWS_CCACHE_TRICK=no])
       CXXFLAGS="$PUSHED_FLAGS"
       if test "x$CC_KNOWS_CCACHE_TRICK" = xyes; then
         AC_MSG_RESULT([yes])
+        CFLAGS_CCACHE="$CCACHE_PRECOMP_FLAG"
+        AC_SUBST(CFLAGS_CCACHE)
+        CCACHE_SLOPPINESS=pch_defines,time_macros
       else
-        AC_MSG_RESULT([no, disabling ccaching of precompiled headers])
-        CCACHE=
-        CCACHE_STATUS="disabled"
+        AC_MSG_RESULT([no])
+        AC_MSG_ERROR([Cannot use ccache with precompiled headers without compiler support for $CCACHE_PRECOMP_FLAG])
       fi
     fi
-  fi
 
-  if test "x$CCACHE" != x; then
-    CCACHE_SLOPPINESS=time_macros
-    CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS $CCACHE"
-    CCACHE_FLAGS=-fpch-preprocess
+    CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR \
+        CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS CCACHE_BASEDIR=$TOPDIR $CCACHE"
 
     if test "x$SET_CCACHE_DIR" != x; then
       mkdir -p $CCACHE_DIR > /dev/null 2>&1
--- a/common/autoconf/generated-configure.sh	Fri Feb 06 12:46:59 2015 +0100
+++ b/common/autoconf/generated-configure.sh	Tue Feb 10 12:25:44 2015 +0100
@@ -629,6 +629,7 @@
 
 ac_subst_vars='LTLIBOBJS
 LIBOBJS
+CFLAGS_CCACHE
 CCACHE
 USE_PRECOMPILED_HEADER
 SJAVAC_SERVER_DIR
@@ -4334,7 +4335,7 @@
 #CUSTOM_AUTOCONF_INCLUDE
 
 # Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1423212925
+DATE_WHEN_GENERATED=1423567509
 
 ###############################################################################
 #
@@ -50882,16 +50883,17 @@
 
 
   CCACHE=
+  CCACHE_STATUS=
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking is ccache enabled" >&5
 $as_echo_n "checking is ccache enabled... " >&6; }
-  ENABLE_CCACHE=$enable_ccache
   if test "x$enable_ccache" = xyes; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+    if test "x$TOOLCHAIN_TYPE" = "xgcc" -o "x$TOOLCHAIN_TYPE" = "xclang"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
-    OLD_PATH="$PATH"
-    if test "x$TOOLCHAIN_PATH" != x; then
-      PATH=$TOOLCHAIN_PATH:$PATH
-    fi
+      OLD_PATH="$PATH"
+      if test "x$TOOLCHAIN_PATH" != x; then
+        PATH=$TOOLCHAIN_PATH:$PATH
+      fi
 
 
 
@@ -51085,11 +51087,19 @@
   fi
 
 
-    CCACHE_STATUS="enabled"
-    PATH="$OLD_PATH"
+      PATH="$OLD_PATH"
+      CCACHE_VERSION=`$CCACHE --version | head -n1 | $SED 's/[A-Za-z ]*//'`
+      CCACHE_STATUS="Active ($CCACHE_VERSION)"
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ccache is not supported with toolchain type $TOOLCHAIN_TYPE" >&5
+$as_echo "$as_me: WARNING: ccache is not supported with toolchain type $TOOLCHAIN_TYPE" >&2;}
+    fi
   elif test "x$enable_ccache" = xno; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, explicitly disabled" >&5
 $as_echo "no, explicitly disabled" >&6; }
+    CCACHE_STATUS="Disabled"
   elif test "x$enable_ccache" = x; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
@@ -51120,23 +51130,17 @@
   if test "x$CCACHE" != x; then
 
   if test "x$CCACHE" != x; then
-    # Only use ccache if it is 3.1.4 or later, which supports
-    # precompiled headers.
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if ccache supports precompiled headers" >&5
-$as_echo_n "checking if ccache supports precompiled headers... " >&6; }
-    HAS_GOOD_CCACHE=`($CCACHE --version | head -n 1 | grep -E 3.1.[456789]) 2> /dev/null`
-    if test "x$HAS_GOOD_CCACHE" = x; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, disabling ccache" >&5
-$as_echo "no, disabling ccache" >&6; }
-      CCACHE=
-      CCACHE_STATUS="disabled"
-    else
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
+    if test "x$USE_PRECOMPILED_HEADER" = "x1"; then
+      HAS_BAD_CCACHE=`$ECHO $CCACHE_VERSION | \
+          $GREP -e '^1.*' -e '^2.*' -e '^3\.0.*' -e '^3\.1\.[0123]'`
+      if test "x$HAS_BAD_CCACHE" != "x"; then
+        as_fn_error $? "Precompiled headers requires ccache 3.1.4 or later, found $CCACHE_VERSION" "$LINENO" 5
+      fi
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking if C-compiler supports ccache precompiled headers" >&5
 $as_echo_n "checking if C-compiler supports ccache precompiled headers... " >&6; }
+      CCACHE_PRECOMP_FLAG="-fpch-preprocess"
       PUSHED_FLAGS="$CXXFLAGS"
-      CXXFLAGS="-fpch-preprocess $CXXFLAGS"
+      CXXFLAGS="$CCACHE_PRECOMP_FLAG $CXXFLAGS"
       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
@@ -51158,19 +51162,18 @@
       if test "x$CC_KNOWS_CCACHE_TRICK" = xyes; then
         { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
-      else
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, disabling ccaching of precompiled headers" >&5
-$as_echo "no, disabling ccaching of precompiled headers" >&6; }
-        CCACHE=
-        CCACHE_STATUS="disabled"
-      fi
-    fi
-  fi
-
-  if test "x$CCACHE" != x; then
-    CCACHE_SLOPPINESS=time_macros
-    CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS $CCACHE"
-    CCACHE_FLAGS=-fpch-preprocess
+        CFLAGS_CCACHE="$CCACHE_PRECOMP_FLAG"
+
+        CCACHE_SLOPPINESS=pch_defines,time_macros
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+        as_fn_error $? "Cannot use ccache with precompiled headers without compiler support for $CCACHE_PRECOMP_FLAG" "$LINENO" 5
+      fi
+    fi
+
+    CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR \
+        CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS CCACHE_BASEDIR=$TOPDIR $CCACHE"
 
     if test "x$SET_CCACHE_DIR" != x; then
       mkdir -p $CCACHE_DIR > /dev/null 2>&1
--- a/common/autoconf/hotspot-spec.gmk.in	Fri Feb 06 12:46:59 2015 +0100
+++ b/common/autoconf/hotspot-spec.gmk.in	Tue Feb 10 12:25:44 2015 +0100
@@ -109,8 +109,8 @@
 MT:=@HOTSPOT_MT@
 RC:=@HOTSPOT_RC@
 
-EXTRA_CFLAGS=@LEGACY_EXTRA_CFLAGS@
-EXTRA_CXXFLAGS=@LEGACY_EXTRA_CXXFLAGS@
+EXTRA_CFLAGS=@LEGACY_EXTRA_CFLAGS@ $(CFLAGS_CCACHE)
+EXTRA_CXXFLAGS=@LEGACY_EXTRA_CXXFLAGS@ $(CFLAGS_CCACHE)
 EXTRA_LDFLAGS=@LEGACY_EXTRA_LDFLAGS@
 
 USE_PRECOMPILED_HEADER=@USE_PRECOMPILED_HEADER@
--- a/common/autoconf/spec.gmk.in	Fri Feb 06 12:46:59 2015 +0100
+++ b/common/autoconf/spec.gmk.in	Tue Feb 10 12:25:44 2015 +0100
@@ -326,6 +326,8 @@
 
 CFLAGS_WARNINGS_ARE_ERRORS:=@CFLAGS_WARNINGS_ARE_ERRORS@
 
+CFLAGS_CCACHE:=@CFLAGS_CCACHE@
+
 # Tools that potentially need to be cross compilation aware.
 CC:=@FIXPATH@ @CCACHE@ @CC@
 
--- a/make/common/NativeCompilation.gmk	Fri Feb 06 12:46:59 2015 +0100
+++ b/make/common/NativeCompilation.gmk	Tue Feb 10 12:25:44 2015 +0100
@@ -87,12 +87,12 @@
 
   ifneq (,$$(filter %.c,$2))
     # Compile as a C file
-    $1_$2_FLAGS=$4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
+    $1_$2_FLAGS=$(CFLAGS_CCACHE) $4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
     $1_$2_COMP=$5
     $1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
   else ifneq (,$$(filter %.m,$2))
     # Compile as a objective-c file
-    $1_$2_FLAGS=-x objective-c $4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
+    $1_$2_FLAGS=-x objective-c $(CFLAGS_CCACHE) $4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
     $1_$2_COMP=$8
     $1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
   else ifneq (,$$(filter %.s,$2))
@@ -102,7 +102,7 @@
     $1_$2_DEP_FLAG:=
   else ifneq (,$$(filter %.cpp,$2)$$(filter %.mm,$2))
     # Compile as a C++ file
-    $1_$2_FLAGS=$6 $$($1_$(notdir $2)_CXXFLAGS) -DTHIS_FILE='"$$(<F)"' -c
+    $1_$2_FLAGS=$(CFLAGS_CCACHE) $6 $$($1_$(notdir $2)_CXXFLAGS) -DTHIS_FILE='"$$(<F)"' -c
     $1_$2_COMP=$7
     $1_$2_DEP_FLAG:=$(CXX_FLAG_DEPS)
   else