view src/share/vm/code/debugInfoRec.hpp @ 900:9987d9d5eb0e

6833129: specjvm98 fails with NullPointerException in the compiler with -XX:DeoptimizeALot Summary: developed a reexecute logic for the interpreter to reexecute the bytecode when deopt happens Reviewed-by: kvn, never, jrose, twisti
author cfang
date Fri, 31 Jul 2009 17:12:33 -0700
parents a61af66fc99e
children 89e0543e1737
line wrap: on
line source
 * Copyright 1998-2005 Sun Microsystems, Inc.  All Rights Reserved.
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
 * CA 95054 USA or visit if you need additional information or
 * have any questions.

//** The DebugInformationRecorder collects debugging information
//   for a compiled method.
//   Debugging information is used for:
//   - garbage collecting compiled frames
//   - stack tracing across compiled frames
//   - deoptimizating compiled frames
//   The implementation requires the compiler to use the recorder
//   in the following order:
//   1) Describe debug information for safepoints at increasing addresses.
//      a) Add safepoint entry (use add_safepoint or add_non_safepoint)
//      b) Describe scopes for that safepoint
//         - create locals if needed (use create_scope_values)
//         - create expressions if needed (use create_scope_values)
//         - create monitor stack if needed (use create_monitor_values)
//         - describe scope (use describe_scope)
//         "repeat last four steps for all scopes"
//         "outer most scope first and inner most scope last"
//         NB: nodes from create_scope_values and create_locations
//             can be reused for simple sharing.
//         - mark the end of the scopes (end_safepoint or end_non_safepoint)
//   2) Use oop_size, data_size, pcs_size to create the nmethod and
//      finally migrate the debugging information into the nmethod
//      by calling copy_to.

class DebugToken; // Opaque datatype for stored:
                  //  - GrowableArray<ScopeValue*>
                  //  - GrowableArray<MonitorValue*>

// Alias for InvocationEntryBci.
// Both constants are used for a pseudo-BCI which refers
// to the state just _before_ a method is entered.
// SynchronizationEntryBCI is used where the emphasis
// is on the implicit monitorenter of a synchronized method.
const int SynchronizationEntryBCI = InvocationEntryBci;

class DIR_Chunk; // private class, a nugget of collected information

class DebugInformationRecorder: public ResourceObj {
  // constructor
  DebugInformationRecorder(OopRecorder* oop_recorder);

  // adds an oopmap at a specific offset
  void add_oopmap(int pc_offset, OopMap* map);

  // adds a jvm mapping at pc-offset, for a safepoint only
  void add_safepoint(int pc_offset, OopMap* map);

  // adds a jvm mapping at pc-offset, for a non-safepoint (profile point)
  void add_non_safepoint(int pc_offset);

  // Describes debugging information for a scope at the given pc_offset.
  // Calls must be in non-decreasing order of pc_offset.
  // If there are several calls at a single pc_offset,
  // then they occur in the same order as they were performed by the JVM,
  // with the most recent (innermost) call being described last.
  // For a safepoint, the pc_offset must have been mentioned
  // previously by add_safepoint.
  // Otherwise, the pc_offset must have been mentioned previously
  // by add_non_safepoint, and the locals, expressions, and monitors
  // must all be null.
  void describe_scope(int         pc_offset,
                      ciMethod*   method,
                      int         bci,
                      bool        reexecute,
                      DebugToken* locals      = NULL,
                      DebugToken* expressions = NULL,
                      DebugToken* monitors    = NULL);

  void dump_object_pool(GrowableArray<ScopeValue*>* objects);

  // This call must follow every add_safepoint,
  // after any intervening describe_scope calls.
  void end_safepoint(int pc_offset)      { end_scopes(pc_offset, true); }
  void end_non_safepoint(int pc_offset)  { end_scopes(pc_offset, false); }

  // helper fuctions for describe_scope to enable sharing
  DebugToken* create_scope_values(GrowableArray<ScopeValue*>* values);
  DebugToken* create_monitor_values(GrowableArray<MonitorValue*>* monitors);

  // returns the size of the generated scopeDescs.
  int data_size();
  int pcs_size();
  int oop_size() { return oop_recorder()->oop_size(); }

  // copy the generated debugging information to nmethod
  void copy_to(nmethod* nm);

  // verifies the debug information
  void verify(const nmethod* code);

  static void print_statistics() PRODUCT_RETURN;

  // Method for setting oopmaps to temporarily preserve old handling of oopmaps
  OopMapSet *_oopmaps;
  void set_oopmaps(OopMapSet *oopmaps) { _oopmaps = oopmaps; }

  OopRecorder* oop_recorder() { return _oop_recorder; }

  int last_pc_offset() { return last_pc()->pc_offset(); }

  bool recording_non_safepoints() { return _recording_non_safepoints; }

  friend class ScopeDesc;
  friend class vframeStreamCommon;
  friend class DIR_Chunk;

  // True if we are recording non-safepoint scopes.
  // This flag is set if DebugNonSafepoints is true, or if
  // JVMTI post_compiled_method_load events are enabled.
  const bool _recording_non_safepoints;

  DebugInfoWriteStream* _stream;

  DebugInfoWriteStream* stream() const { return _stream; }

  OopRecorder* _oop_recorder;

  // Scopes that have been described so far.
  GrowableArray<DIR_Chunk*>* _all_chunks;
  GrowableArray<DIR_Chunk*>* _shared_chunks;
  DIR_Chunk* _next_chunk;
  DIR_Chunk* _next_chunk_limit;

#ifdef ASSERT
  enum { rs_null, rs_safepoint, rs_non_safepoint };
  int _recording_state;

  PcDesc* _pcs;
  int     _pcs_size;
  int     _pcs_length;
  // Note:  Would use GrowableArray<PcDesc>, but structs are not supported.

  // PC of most recent real safepoint before the current one,
  // updated after end_scopes.
  int _prev_safepoint_pc;

  PcDesc* last_pc() {
    guarantee(_pcs_length > 0, "a safepoint must be declared already");
    return &_pcs[_pcs_length-1];
  PcDesc* prev_pc() {
    guarantee(_pcs_length > 1, "a safepoint must be declared already");
    return &_pcs[_pcs_length-2];
  void add_new_pc_offset(int pc_offset);
  void end_scopes(int pc_offset, bool is_safepoint);

  int  serialize_monitor_values(GrowableArray<MonitorValue*>* monitors);
  int  serialize_scope_values(GrowableArray<ScopeValue*>* values);
  int  find_sharable_decode_offset(int stream_offset);

  enum { serialized_null = 0 };