changeset 59938:ecb533f7f66d

8220639: Need a way to augment JTREG_LAUNCHER_OPTIONS from command-line Reviewed-by: erikj, dholmes
author ihse
date Thu, 25 Jun 2020 18:35:40 +0200
parents bf2cdc10fabe
children 6c730060e94e
files doc/testing.html doc/testing.md make/Global.gmk make/RunTests.gmk make/common/Utils.gmk
diffstat 5 files changed, 144 insertions(+), 64 deletions(-) [+]
line wrap: on
line diff
--- a/doc/testing.html	Thu Jun 25 14:19:37 2020 +0100
+++ b/doc/testing.html	Thu Jun 25 18:35:40 2020 +0200
@@ -137,6 +137,8 @@
 <h4 id="timeout_factor-1">TIMEOUT_FACTOR</h4>
 <p>The timeout factor (<code>-timeoutFactor</code>).</p>
 <p>Defaults to 4.</p>
+<h4 id="failure_handler_timeout">FAILURE_HANDLER_TIMEOUT</h4>
+<p>Sets the argument <code>-timeoutHandlerTimeout</code> for JTReg. The default value is 0. This is only valid if the failure handler is built.</p>
 <h4 id="test_mode">TEST_MODE</h4>
 <p>The test mode (<code>agentvm</code> or <code>othervm</code>).</p>
 <p>Defaults to <code>agentvm</code>.</p>
@@ -153,8 +155,10 @@
 <p>Limit memory consumption (<code>-Xmx</code> and <code>-vmoption:-Xmx</code>, or none).</p>
 <p>Limit memory consumption for JTReg test framework and VM under test. Set to 0 to disable the limits.</p>
 <p>Defaults to 512m, except for hotspot, where it defaults to 0 (no limit).</p>
+<h4 id="max_output">MAX_OUTPUT</h4>
+<p>Set the property <code>javatest.maxOutputSize</code> for the launcher, to change the default JTReg log limit.</p>
 <h4 id="keywords">KEYWORDS</h4>
-<p>JTReg kewords sent to JTReg using <code>-k</code>. Please be careful in making sure that spaces and special characters (like <code>!</code>) are properly quoted. To avoid some issues, the special value <code>%20</code> can be used instead of space.</p>
+<p>JTReg keywords sent to JTReg using <code>-k</code>. Please be careful in making sure that spaces and special characters (like <code>!</code>) are properly quoted. To avoid some issues, the special value <code>%20</code> can be used instead of space.</p>
 <h4 id="extra_problem_lists">EXTRA_PROBLEM_LISTS</h4>
 <p>Use additional problem lists file or files, in addition to the default ProblemList.txt located at the JTReg test roots.</p>
 <p>If multiple file names are specified, they should be separated by space (or, to help avoid quoting issues, the special value <code>%20</code>).</p>
@@ -170,6 +174,8 @@
 <h4 id="vm_options-1">VM_OPTIONS</h4>
 <p>Additional Java options to be used when compiling and running classes (sent to JTReg as <code>-vmoption</code>).</p>
 <p>This option is only needed in special circumstances. To pass Java options to your test classes, use <code>JAVA_OPTIONS</code>.</p>
+<h4 id="launcher_options">LAUNCHER_OPTIONS</h4>
+<p>Additional Java options that are sent to the java launcher that starts the JTReg harness.</p>
 <h4 id="aot_modules-1">AOT_MODULES</h4>
 <p>Generate AOT modules before testing for the specified module, or set of modules. If multiple modules are specified, they should be separated by space (or, to help avoid quoting issues, the special value <code>%20</code>).</p>
 <h4 id="retry_count">RETRY_COUNT</h4>
@@ -205,14 +211,19 @@
 <p>Docker tests with default parameters may fail on systems with glibc versions not compatible with the one used in the default docker image (e.g., Oracle Linux 7.6 for x86). For example, they pass on Ubuntu 16.04 but fail on Ubuntu 18.04 if run like this on x86:</p>
 <pre><code>$ make test TEST=&quot;jtreg:test/hotspot/jtreg/containers/docker&quot;</code></pre>
 <p>To run these tests correctly, additional parameters for the correct docker image are required on Ubuntu 18.04 by using <code>JAVA_OPTIONS</code>.</p>
-<pre><code>$ make test TEST=&quot;jtreg:test/hotspot/jtreg/containers/docker&quot; JTREG=&quot;JAVA_OPTIONS=-Djdk.test.docker.image.name=ubuntu -Djdk.test.docker.image.version=latest&quot;</code></pre>
+<pre><code>$ make test TEST=&quot;jtreg:test/hotspot/jtreg/containers/docker&quot; \
+    JTREG=&quot;JAVA_OPTIONS=-Djdk.test.docker.image.name=ubuntu
+    -Djdk.test.docker.image.version=latest&quot;</code></pre>
 <h3 id="non-us-locale">Non-US locale</h3>
-<p>If your locale is non-US, some tests are likely to fail. To work around this you can set the locale to US. On Unix platforms simply setting <code>LANG=&quot;en_US&quot;</code> in the environment before running tests should work. On Windows, setting <code>JTREG=&quot;VM_OPTIONS=-Duser.language=en -Duser.country=US&quot;</code> helps for most, but not all test cases. For example:</p>
+<p>If your locale is non-US, some tests are likely to fail. To work around this you can set the locale to US. On Unix platforms simply setting <code>LANG=&quot;en_US&quot;</code> in the environment before running tests should work. On Windows, setting <code>JTREG=&quot;VM_OPTIONS=-Duser.language=en -Duser.country=US&quot;</code> helps for most, but not all test cases.</p>
+<p>For example:</p>
 <pre><code>$ export LANG=&quot;en_US&quot; &amp;&amp; make test TEST=...
 $ make test JTREG=&quot;VM_OPTIONS=-Duser.language=en -Duser.country=US&quot; TEST=...</code></pre>
 <h3 id="pkcs11-tests">PKCS11 Tests</h3>
-<p>It is highly recommended to use the latest NSS version when running PKCS11 tests. Improper NSS version may lead to unexpected failures which are hard to diagnose. For example, sun/security/pkcs11/Secmod/AddTrustedCert.java may fail on Ubuntu 18.04 with the default NSS version in the system. To run these tests correctly, the system property <code>test.nss.lib.paths</code> is required on Ubuntu 18.04 to specify the alternative NSS lib directories. For example:</p>
-<pre><code>$ make test TEST=&quot;jtreg:sun/security/pkcs11/Secmod/AddTrustedCert.java&quot; JTREG=&quot;JAVA_OPTIONS=-Dtest.nss.lib.paths=/path/to/your/latest/NSS-libs&quot;</code></pre>
+<p>It is highly recommended to use the latest NSS version when running PKCS11 tests. Improper NSS version may lead to unexpected failures which are hard to diagnose. For example, sun/security/pkcs11/Secmod/AddTrustedCert.java may fail on Ubuntu 18.04 with the default NSS version in the system. To run these tests correctly, the system property <code>test.nss.lib.paths</code> is required on Ubuntu 18.04 to specify the alternative NSS lib directories.</p>
+<p>For example:</p>
+<pre><code>$ make test TEST=&quot;jtreg:sun/security/pkcs11/Secmod/AddTrustedCert.java&quot; \
+    JTREG=&quot;JAVA_OPTIONS=-Dtest.nss.lib.paths=/path/to/your/latest/NSS-libs&quot;</code></pre>
 <p>For more notes about the PKCS11 tests, please refer to test/jdk/sun/security/pkcs11/README.</p>
 <h3 id="client-ui-tests">Client UI Tests</h3>
 <p>Some Client UI tests use key sequences which may be reserved by the operating system. Usually that causes the test failure. So it is highly recommended to disable system key shortcuts prior testing. The steps to access and disable system key shortcuts for various platforms are provided below.</p>
--- a/doc/testing.md	Thu Jun 25 14:19:37 2020 +0100
+++ b/doc/testing.md	Thu Jun 25 18:35:40 2020 +0200
@@ -37,11 +37,11 @@
 containing `lib/jtreg.jar` etc. (An alternative is to set the `JT_HOME`
 environment variable to point to the JTReg home before running `configure`.)
 
-To be able to run microbenchmarks, `configure` needs to know where to find
-the JMH dependency. Use `--with-jmh=<path to JMH jars>` to point to a directory
-containing the core JMH and transitive dependencies. The recommended dependencies
-can be retrieved by running `sh make/devkit/createJMHBundle.sh`, after which
-`--with-jmh=build/jmh/jars` should work.
+To be able to run microbenchmarks, `configure` needs to know where to find the
+JMH dependency. Use `--with-jmh=<path to JMH jars>` to point to a directory
+containing the core JMH and transitive dependencies. The recommended
+dependencies can be retrieved by running `sh make/devkit/createJMHBundle.sh`,
+after which `--with-jmh=build/jmh/jars` should work.
 
 ## Test selection
 
@@ -182,10 +182,10 @@
 These variables use a keyword=value approach to allow multiple values to be
 set. So, for instance, `JTREG="JOBS=1;TIMEOUT_FACTOR=8"` will set the JTReg
 concurrency level to 1 and the timeout factor to 8. This is equivalent to
-setting `JTREG_JOBS=1 JTREG_TIMEOUT_FACTOR=8`, but using the keyword format means that
-the `JTREG` variable is parsed and verified for correctness, so
-`JTREG="TMIEOUT_FACTOR=8"` would give an error, while `JTREG_TMIEOUT_FACTOR=8` would just
-pass unnoticed.
+setting `JTREG_JOBS=1 JTREG_TIMEOUT_FACTOR=8`, but using the keyword format
+means that the `JTREG` variable is parsed and verified for correctness, so
+`JTREG="TMIEOUT_FACTOR=8"` would give an error, while `JTREG_TMIEOUT_FACTOR=8`
+would just pass unnoticed.
 
 To separate multiple keyword=value pairs, use `;` (semicolon). Since the shell
 normally eats `;`, the recommended usage is to write the assignment inside
@@ -203,9 +203,10 @@
 
 ### General keywords (TEST_OPTS)
 
-Some keywords are valid across different test suites. If you want to run
-tests from multiple test suites, or just don't want to care which test suite specific
-control variable to use, then you can use the general TEST_OPTS control variable.
+Some keywords are valid across different test suites. If you want to run tests
+from multiple test suites, or just don't want to care which test suite specific
+control variable to use, then you can use the general TEST_OPTS control
+variable.
 
 There are also some keywords that applies globally to the test runner system,
 not to any specific test suites. These are also available as TEST_OPTS keywords.
@@ -252,12 +253,13 @@
 revision. A textual report will be generated showing coverage of the diff
 between the specified revision and the repository tip.
 
-The report is stored in `build/$BUILD/test-results/jcov-output/diff_coverage_report`
-file.
+The report is stored in
+`build/$BUILD/test-results/jcov-output/diff_coverage_report` file.
 
 ### JTReg keywords
 
 #### JOBS
+
 The test concurrency (`-concurrency`).
 
 Defaults to TEST_JOBS (if set by `--with-test-jobs=`), otherwise it defaults to
@@ -265,32 +267,43 @@
 but never more than *memory size in GB/2*.
 
 #### TIMEOUT_FACTOR
+
 The timeout factor (`-timeoutFactor`).
 
 Defaults to 4.
 
+#### FAILURE_HANDLER_TIMEOUT
+
+Sets the argument `-timeoutHandlerTimeout` for JTReg. The default value is 0.
+This is only valid if the failure handler is built.
+
 #### TEST_MODE
+
 The test mode (`agentvm` or `othervm`).
 
 Defaults to `agentvm`.
 
 #### ASSERT
+
 Enable asserts (`-ea -esa`, or none).
 
 Set to `true` or `false`. If true, adds `-ea -esa`. Defaults to true, except
 for hotspot.
 
 #### VERBOSE
+
 The verbosity level (`-verbose`).
 
 Defaults to `fail,error,summary`.
 
 #### RETAIN
+
 What test data to retain (`-retain`).
 
 Defaults to `fail,error`.
 
 #### MAX_MEM
+
 Limit memory consumption (`-Xmx` and `-vmoption:-Xmx`, or none).
 
 Limit memory consumption for JTReg test framework and VM under test. Set to 0
@@ -298,9 +311,14 @@
 
 Defaults to 512m, except for hotspot, where it defaults to 0 (no limit).
 
+#### MAX_OUTPUT
+
+Set the property `javatest.maxOutputSize` for the launcher, to change the
+default JTReg log limit.
+
 #### KEYWORDS
 
-JTReg kewords sent to JTReg using `-k`. Please be careful in making sure that
+JTReg keywords sent to JTReg using `-k`. Please be careful in making sure that
 spaces and special characters (like `!`) are properly quoted. To avoid some
 issues, the special value `%20` can be used instead of space.
 
@@ -323,23 +341,30 @@
 If `true`, JTReg will use `-match:` option, otherwise `-exclude:` will be used.
 Default is `false`.
 
+#### OPTIONS
 
-#### OPTIONS
 Additional options to the JTReg test framework.
 
 Use `JTREG="OPTIONS=--help all"` to see all available JTReg options.
 
 #### JAVA_OPTIONS
+
 Additional Java options for running test classes (sent to JTReg as
 `-javaoption`).
 
 #### VM_OPTIONS
+
 Additional Java options to be used when compiling and running classes (sent to
 JTReg as `-vmoption`).
 
 This option is only needed in special circumstances. To pass Java options to
 your test classes, use `JAVA_OPTIONS`.
 
+#### LAUNCHER_OPTIONS
+
+Additional Java options that are sent to the java launcher that starts the
+JTReg harness.
+
 #### AOT_MODULES
 
 Generate AOT modules before testing for the specified module, or set of
@@ -353,6 +378,7 @@
 ### Gtest keywords
 
 #### REPEAT
+
 The number of times to repeat the tests (`--gtest_repeat`).
 
 Default is 1. Set to -1 to repeat indefinitely. This can be especially useful
@@ -360,6 +386,7 @@
 problem.
 
 #### OPTIONS
+
 Additional options to the Gtest test framework.
 
 Use `GTEST="OPTIONS=--help"` to see all available Gtest options.
@@ -373,98 +400,127 @@
 ### Microbenchmark keywords
 
 #### FORK
+
 Override the number of benchmark forks to spawn. Same as specifying `-f <num>`.
 
 #### ITER
+
 Number of measurement iterations per fork. Same as specifying `-i <num>`.
 
 #### TIME
+
 Amount of time to spend in each measurement iteration, in seconds. Same as
 specifying `-r <num>`
 
 #### WARMUP_ITER
+
 Number of warmup iterations to run before the measurement phase in each fork.
 Same as specifying `-wi <num>`.
 
 #### WARMUP_TIME
+
 Amount of time to spend in each warmup iteration. Same as specifying `-w <num>`.
 
 #### RESULTS_FORMAT
+
 Specify to have the test run save a log of the values. Accepts the same values
 as `-rff`, i.e., `text`, `csv`, `scsv`, `json`, or `latex`.
 
 #### VM_OPTIONS
+
 Additional VM arguments to provide to forked off VMs. Same as `-jvmArgs <args>`
 
 #### OPTIONS
+
 Additional arguments to send to JMH.
 
 ## Notes for Specific Tests
 
 ### Docker Tests
 
-Docker tests with default parameters may fail on systems with glibc versions not
-compatible with the one used in the default docker image (e.g., Oracle Linux 7.6 for x86).
-For example, they pass on Ubuntu 16.04 but fail on Ubuntu 18.04 if run like this on x86:
+Docker tests with default parameters may fail on systems with glibc versions
+not compatible with the one used in the default docker image (e.g., Oracle
+Linux 7.6 for x86). For example, they pass on Ubuntu 16.04 but fail on Ubuntu
+18.04 if run like this on x86:
 
-    $ make test TEST="jtreg:test/hotspot/jtreg/containers/docker"
+```
+$ make test TEST="jtreg:test/hotspot/jtreg/containers/docker"
+```
 
-To run these tests correctly, additional parameters for the correct docker image are
-required on Ubuntu 18.04 by using `JAVA_OPTIONS`.
+To run these tests correctly, additional parameters for the correct docker
+image are required on Ubuntu 18.04 by using `JAVA_OPTIONS`.
 
-    $ make test TEST="jtreg:test/hotspot/jtreg/containers/docker" JTREG="JAVA_OPTIONS=-Djdk.test.docker.image.name=ubuntu -Djdk.test.docker.image.version=latest"
+```
+$ make test TEST="jtreg:test/hotspot/jtreg/containers/docker" \
+    JTREG="JAVA_OPTIONS=-Djdk.test.docker.image.name=ubuntu
+    -Djdk.test.docker.image.version=latest"
+```
 
 ### Non-US locale
 
-If your locale is non-US, some tests are likely to fail. To work around this you can
-set the locale to US. On Unix platforms simply setting `LANG="en_US"` in the
-environment before running tests should work. On Windows, setting
-`JTREG="VM_OPTIONS=-Duser.language=en -Duser.country=US"` helps for most, but not all test cases.
+If your locale is non-US, some tests are likely to fail. To work around this
+you can set the locale to US. On Unix platforms simply setting `LANG="en_US"`
+in the environment before running tests should work. On Windows, setting
+`JTREG="VM_OPTIONS=-Duser.language=en -Duser.country=US"` helps for most, but
+not all test cases.
+
 For example:
 
-    $ export LANG="en_US" && make test TEST=...
-    $ make test JTREG="VM_OPTIONS=-Duser.language=en -Duser.country=US" TEST=...
+```
+$ export LANG="en_US" && make test TEST=...
+$ make test JTREG="VM_OPTIONS=-Duser.language=en -Duser.country=US" TEST=...
+```
 
 ### PKCS11 Tests
 
-It is highly recommended to use the latest NSS version when running PKCS11 tests.
-Improper NSS version may lead to unexpected failures which are hard to diagnose.
-For example, sun/security/pkcs11/Secmod/AddTrustedCert.java may fail on Ubuntu
-18.04 with the default NSS version in the system.
-To run these tests correctly, the system property `test.nss.lib.paths` is required
-on Ubuntu 18.04 to specify the alternative NSS lib directories.
+It is highly recommended to use the latest NSS version when running PKCS11
+tests. Improper NSS version may lead to unexpected failures which are hard to
+diagnose. For example, sun/security/pkcs11/Secmod/AddTrustedCert.java may fail
+on Ubuntu 18.04 with the default NSS version in the system. To run these tests
+correctly, the system property `test.nss.lib.paths` is required on Ubuntu 18.04
+to specify the alternative NSS lib directories.
+
 For example:
 
-    $ make test TEST="jtreg:sun/security/pkcs11/Secmod/AddTrustedCert.java" JTREG="JAVA_OPTIONS=-Dtest.nss.lib.paths=/path/to/your/latest/NSS-libs"
+```
+$ make test TEST="jtreg:sun/security/pkcs11/Secmod/AddTrustedCert.java" \
+    JTREG="JAVA_OPTIONS=-Dtest.nss.lib.paths=/path/to/your/latest/NSS-libs"
+```
 
-For more notes about the PKCS11 tests, please refer to test/jdk/sun/security/pkcs11/README.
+For more notes about the PKCS11 tests, please refer to
+test/jdk/sun/security/pkcs11/README.
 
 ### Client UI Tests
 
 Some Client UI tests use key sequences which may be reserved by the operating
-system. Usually that causes the test failure. So it is highly recommended to disable
-system key shortcuts prior testing. The steps to access and disable system key shortcuts
-for various platforms are provided below.
+system. Usually that causes the test failure. So it is highly recommended to
+disable system key shortcuts prior testing. The steps to access and disable
+system key shortcuts for various platforms are provided below.
 
 #### MacOS
+
 Choose Apple menu; System Preferences, click Keyboard, then click Shortcuts;
 select or deselect desired shortcut.
 
-For example, test/jdk/javax/swing/TooltipManager/JMenuItemToolTipKeyBindingsTest/JMenuItemToolTipKeyBindingsTest.java fails
-on MacOS because it uses `CTRL + F1` key sequence to show or hide tooltip message
-but the key combination is reserved by the operating system. To run the test correctly
-the default global key shortcut should be disabled using the steps described above, and then deselect
-"Turn keyboard access on or off" option which is responsible for `CTRL + F1` combination.
+For example,
+test/jdk/javax/swing/TooltipManager/JMenuItemToolTipKeyBindingsTest/JMenuItemToolTipKeyBindingsTest.java
+fails on MacOS because it uses `CTRL + F1` key sequence to show or hide tooltip
+message but the key combination is reserved by the operating system. To run the
+test correctly the default global key shortcut should be disabled using the
+steps described above, and then deselect "Turn keyboard access on or off"
+option which is responsible for `CTRL + F1` combination.
 
 #### Linux
-Open the Activities overview and start typing Settings; Choose Settings, click Devices,
-then click Keyboard; set or override desired shortcut.
+
+Open the Activities overview and start typing Settings; Choose Settings, click
+Devices, then click Keyboard; set or override desired shortcut.
 
 #### Windows
-Type `gpedit` in the Search and then click Edit group policy; navigate to
-User Configuration -> Administrative Templates -> Windows Components -> File Explorer;
-in the right-side pane look for "Turn off Windows key hotkeys" and double click on it;
-enable or disable hotkeys.
+
+Type `gpedit` in the Search and then click Edit group policy; navigate to User
+Configuration -> Administrative Templates -> Windows Components -> File
+Explorer; in the right-side pane look for "Turn off Windows key hotkeys" and
+double click on it; enable or disable hotkeys.
 
 Note: restart is required to make the settings take effect.
 
--- a/make/Global.gmk	Thu Jun 25 14:19:37 2020 +0100
+++ b/make/Global.gmk	Thu Jun 25 18:35:40 2020 +0200
@@ -101,9 +101,9 @@
 	$(info $(_)                        # method is 'auto', 'ignore' or 'fail' (default))
 	$(info $(_) TEST="test1 ..."       # Use the given test descriptor(s) for testing, e.g.)
 	$(info $(_)                        # make test TEST="jdk_lang gtest:all")
-	$(info $(_) JTREG="OPT1=x;OPT2=y"  # Control the JTREG test harness)
-	$(info $(_) GTEST="OPT1=x;OPT2=y"  # Control the GTEST test harness)
-	$(info $(_) MICRO="OPT1=x;OPT2=y"  # Control the MICRO test harness)
+	$(info $(_) JTREG="OPT1=x;OPT2=y"  # Control the JTREG test harness, use 'help' to list)
+	$(info $(_) GTEST="OPT1=x;OPT2=y"  # Control the GTEST test harness, use 'help' to list)
+	$(info $(_) MICRO="OPT1=x;OPT2=y"  # Control the MICRO test harness, use 'help' to list)
 	$(info $(_) TEST_OPTS="OPT1=x;..." # Generic control of all test harnesses)
 	$(info $(_) TEST_VM_OPTS="ARG ..." # Same as setting TEST_OPTS to VM_OPTIONS="ARG ...")
 	$(info )
--- a/make/RunTests.gmk	Thu Jun 25 14:19:37 2020 +0100
+++ b/make/RunTests.gmk	Thu Jun 25 18:35:40 2020 +0200
@@ -143,9 +143,6 @@
 # Optionally create AOT libraries for specified modules before running tests.
 # Note, this could not be done during JDK build time.
 ################################################################################
-
-# Note, this could not be done during JDK build time.
-
 # Parameter 1 is the name of the rule.
 #
 # Remaining parameters are named arguments.
@@ -198,6 +195,10 @@
   $1_AOT_TARGETS += $$($1_AOT_LIB)
 endef
 
+################################################################################
+# Optionally create AOT libraries before running tests.
+# Note, this could not be done during JDK build time.
+################################################################################
 # Parameter 1 is the name of the rule.
 #
 # Remaining parameters are named arguments.
@@ -291,9 +292,9 @@
 $(eval $(call ParseKeywordVariable, JTREG, \
     SINGLE_KEYWORDS := JOBS TIMEOUT_FACTOR FAILURE_HANDLER_TIMEOUT \
         TEST_MODE ASSERT VERBOSE RETAIN MAX_MEM RUN_PROBLEM_LISTS \
-        RETRY_COUNT, \
+        RETRY_COUNT MAX_OUTPUT, \
     STRING_KEYWORDS := OPTIONS JAVA_OPTIONS VM_OPTIONS KEYWORDS \
-        EXTRA_PROBLEM_LISTS AOT_MODULES, \
+        EXTRA_PROBLEM_LISTS AOT_MODULES LAUNCHER_OPTIONS, \
 ))
 
 ifneq ($(JTREG), )
@@ -844,6 +845,14 @@
   JTREG_RUN_PROBLEM_LISTS ?= false
   JTREG_RETRY_COUNT ?= 0
 
+  ifneq ($$(JTREG_LAUNCHER_OPTIONS), )
+    $1_JTREG_LAUNCHER_OPTIONS += $$(JTREG_LAUNCHER_OPTIONS)
+  endif
+
+  ifneq ($$(JTREG_MAX_OUTPUT), )
+    $1_JTREG_LAUNCHER_OPTIONS += -Djavatest.maxOutputSize=$$(JTREG_MAX_OUTPUT)
+  endif
+
   ifneq ($$($1_JTREG_MAX_MEM), 0)
     $1_JTREG_BASIC_OPTIONS += -vmoption:-Xmx$$($1_JTREG_MAX_MEM)
     $1_JTREG_LAUNCHER_OPTIONS += -Xmx$$($1_JTREG_MAX_MEM)
--- a/make/common/Utils.gmk	Thu Jun 25 14:19:37 2020 +0100
+++ b/make/common/Utils.gmk	Thu Jun 25 18:35:40 2020 +0200
@@ -220,6 +220,10 @@
       $$(eval mangled_part_eval := $$(call DoubleDollar, $$(mangled_part))) \
       $$(eval part := $$$$(subst ||||,$$$$(SPACE),$$$$(mangled_part_eval))) \
       $$(eval $1_NO_MATCH := true) \
+      $$(if $$(filter help, $$(part)), \
+        $$(info Valid keywords for $1:) \
+        $$(info $$($1_SINGLE_KEYWORDS) $$($1_STRING_KEYWORDS).) \
+        $$(error Re-run without 'help' to continue)) \
       $$(foreach keyword, $$($1_SINGLE_KEYWORDS), \
         $$(eval keyword_eval := $$(call DoubleDollar, $$(keyword))) \
         $$(if $$(filter $$(keyword)=%, $$(part)), \